Friday, July 30, 2021

New Research Finds Possible Association Between Wildfire Smoke and Increased COVID-19 Infection Rates 

The wildfire season of 2020 set several records in the United States, with 2.3 million more acres burning than the ten-year average. This year’s fires may bring even more damage. Oregon, for example, has already experienced 26 large wildfires, compared to last year’s seven large wildfires by the same point in the year.

Wildfire season is also well underway in California,  Washington State, Nevada, and several Canadian provinces, but the effects of the smoke are being seen across the continent. Washington D.C. is experiencing haze and decreased air quality, the sun is glowing red in New York City, and Baltimore and Philadelphia have issued air quality warnings due to wildfire smoke.

What Pollutants Does Wildfire Smoke Produce?
Wildfire smoke contains a variety of gaseous pollutants, which are the products of combustion, including:

carbon monoxide
nitrogen oxides
carbon dioxide
methane
ozone
water vapor
smoke odor

The Environmental Protection Agency (EPA) considers particulate matter to be the primary public health threat coming from wildfire smoke. Particulate matter refers to microscopic particles suspended in the air made out of any material. Particulate matter is classified by its size range as follows:

PM10 – particles with a diameter of 10 microns or less.
PM2.5 – particles with a diameter of 2.5 microns or less.
PM1 – particles with a diameter of 1 micron or less.
Study Finds Link Between Particulate Matter from Wildfire Smoke and COVID-19 Infections

The study, conducted in Reno, Nevada, by the Center for Genomic Medicine at the Desert Research Institute (DRI), Washoe County Health District (WCHD), and Renown Health (Renown), was published in the Journal of Exposure Science and Environmental Epidemiology.

The study sought to examine a possible connection between the elevated presence of fine particulate matter (PM2.5) in the air following wildfires in 2020 and the rate of COVID-19 infection in the area.

The researchers found that a 10 µg/m3 increase in the seven-day average of PM2.5 was associated with a 6.3% relative increase in the rate of positive COVID-19 tests. Specifically, the increase was seen two to six days after the increase in ambient pollution, suggesting that even short-term exposure to particulate matter pollution increases the likelihood of infection.

This result supports the findings of previous research, which suggests that the presence of fine particulate matter in the air is linked to increased COVID-19 infections.

Why Does Polluted Air Increase the Risk of COVID-19 Infection?
Scientists speculate several reasons why the presence of pollution in the air, specifically PM2.5, is associated with increased COVID-19 infections.

Fine particulate matter (PM2.5) may modify immune system responses and increase inflammation, leaving the body more susceptible to respiratory viruses.
A study conducted in Italy in 2020 found that the SARS-CoV-2 virus was present on the surface of PM2.5 particles. This finding has led scientists to hypothesize that the presence of particulate matter in the air may increase the spread and prolong the survival of the virus, as well as other pathogens.
Elevated levels of PM2.5 and nitrogen dioxide (NO2) in the air may lead to over-expression of the ACE2 receptor in the respiratory tract. The ACE2 receptor is responsible for allowing the SARS-CoV-2 virus to enter the cell. Experts are uncertain whether this effect is produced by short-term exposure to polluted air or  only long-term exposure. More research is needed.
People tend to gather indoors when wildfire smoke is present outdoors, leading to increased spread through direct contact.

Particulate Matter Is a Known Public Health Threat
While the evidence that the presence of PM2.5 is linked to COVID-19 infection may be new, particulate matter is known to cause and worsen a variety of health conditions:

irregular heartbeat
aggravated asthma or other respiratory conditions
heart attacks (usually nonfatal)
coughing, difficulty breathing, or other symptoms of an irritated respiratory tract
premature death, especially in individuals with heart or lung disease

Improving Air Quality During Wildfire Season to Prevent the Spread of COVID-19
Protecting indoor spaces from the nuisance odors and harmful effects of wildfire smoke, including increased risk of COVID-19, can be achieved through high efficiency air filtration.

To target particulate matter, experts from leading international air filtration manufacturer Camfil recommend a fibrous filter rated MERV 14A or higher, if possible, such as the Durafil ES2. For air handling units that lack sufficient space for a MERV 14A-rated filter, a long-lasting panel filter such as the 30/30 Dual 9 is advised.

To target gaseous pollutants, such as ozone, Camfil also recommends a molecular (i.e.- contains activated carbon) filter, such as CitySorb DP or a CityPleat.

If space is limited, Camfil recommends CityCarb I, which is a combination filter that uses MERV14A and a high-capacity molecular filter.

Alternatively, an in-room air purifier, such as the City M, which works independently of a building’s HVAC system, contains both a HEPA filter and a high capacity molecular filter.

About Camfil Clean Air Solutions

For more than half a century, Camfil has been helping people breathe cleaner air. As a leading manufacturer of premium clean air solutions, we provide commercial and industrial systems for air filtration and air pollution control that improve worker and equipment productivity, minimize energy use, and benefit human health and the environment. We firmly believe that the best solutions for our customers are the best solutions for our planet, too. That’s why every step of the way – from design to delivery and across the product life cycle – we consider the impact of what we do on people and on the world around us. Through a fresh approach to problem-solving, innovative design, precise process control, and a strong customer focus we aim to conserve more, use less and find better ways – so we can all breathe easier.

The Camfil Group is headquartered in Stockholm, Sweden, and has 33​ manufacturing sites, six R&D centers, local sales offices in 30 countries, and about 4,80​0 employees and growing. We proudly serve and support customers in a wide variety of industries and in communities across the world. To discover how Camfil USA can help you to protect people, processes and the environment, visit us at https://bit.ly/3zPlYLq

##

Media Contact:

Lynne Laake

Camfil USA Air Filters

T: 888.599.6620

E: Lynne.Laake@camfil.com

F: Friend  Camfil USA on Facebook

T: Follow Camfil USA on Twitter

Y: Watch Camfil Videos on YouTube

L: Follow our LinkedIn Page

 

 

 

The post New Research Finds Possible Association Between Wildfire Smoke and Increased COVID-19 Infection Rates  appeared first on Air Filters for Clean Air.



from Air Filters for Clean Air

Sunday, July 11, 2021

An Up-Close Look at the Most Energy Efficient Bag Filter on the Market

What Is A Bag Filter?

Bag filters,  commonly used air filters in industrial and commercial HVAC systems, can be used as the sole air filter solution or as prefilters in front of final filters for applications experiencing a high dirtload. . Bag filters, also referred to as pocket filters, are frequently used in residential buildings to improve indoor air quality and comfort. With a lower resistance to airflow, higher dust holding capacity and longer lifetime than other filters, bag filters may be the perfect solution for many applications.  

The Only Bag Air Filter that Doesn’t Require a Prefilter

Because of its unique construction, which uses tapered pocket stitching to prevent pocket contact throughout the depth of the filter ensuring uniform airflow and optimal use of the media area, Camfil’s Hi-Flo ES is the only bag filter in the HVAC industry that does not require a prefilter. To maintain flexibility regardless of turbulence or variance in airflow, as well as eliminate air bypass through stitching points, pocket stitching is sealed. The results: lower labor costs, a longer filter life, fewer filter changes, lower HVAC energy costs, lower disposal costs, and an overall more environmentally-friendly product. 

Why Choose Camfil’s Hi-Flo ES?

Lower HVAC energy use than competitive filters.

Compared to competitor filters, the Hi-Flo ES uses 27-50% less energy through the HVAC system. Hi-Flo ES pocket filters improve indoor air quality while reducing energy consumption. The Hi-Flo’s conical pockets, seam design, and stitching technique allow air to flow as freely as possible through the filter. This lower resistance, combined with filter media engineered to capture and hold a large volume of airborne dirt,  results in improved filter performance, and considerably lower life cycle cost of the filter. 

 

Longer life than competitive filters. 

As well as reducing HVAC energy consumption costs, the Hi-Flo ES lasts 25-50% longer than comparable rigid filters on the market, saving labor and filter replacement costs. In addition to lasting 12 months or longer guaranteed, the Hi-Flo ES is complete with several design features that make it easy to install and replace, including cleverly designed packaging that allows for up to eight filters to be carried at a time by a single person.  This packaging takes up just a quarter of the space that rigid filters do which equates up to a 70% reduction in disposal cost.

 

Read a summary of the Hi-Flo ES highlights here. 

Camfil Hi-Flo ES Basics

An overview of the Hi-Flo ES unique product specifications:

 

APPLICATIONS Multi-pocket, high-efficiency filters with tapered pleats and pockets available in 12″, 15″, 22″ and 30″ depths
GUARANTEED SERVICE LIFE Guaranteed up to 12 months even without a prefilter
MATERIALS Frame:  Plastic, ABS

Media:  Glass fiber that maintains MERV value for the duration of service life

Gasket: Neoprene

MAXIMUM TEMPERATURE  160°F (71°C)
RECOMMENDED FINAL PRESSURE DROP 2x Initial pressure drop
EFFICIENCY Available in MERV 15/15-A, MERV 14/14-A, MERV 13/13-A, and MERV 11/11-A
RATINGS
  • 5-Star ECI value  (indicates that the filter performs in the top 20% of all similar products across the HVAC industry)
  • Listed as UL 900 by Underwriters Laboratories 
DEPTH Available in 12”, 15”, 22”, and 30” depths

 

(Find the full product specifications here.)  

Camfil Hi-Flo ES Applications 

As a powerful, long-lasting air filter available in four depths and four efficiency levels, the Hi-Flo ES can be used in a wide range of HVAC applications across industry segments. 

 

Protection Against Wildfire Smoke. 

As summer approaches, the threat of wildfires becomes more prominent. In recent years, wildfire season has been lasting longer and starting earlier, causing more destruction to nearby communities, as well as spreading harmful contaminants far and wide as smoke is carried hundreds of miles or more from the site of the fire. 90% of wildfire smoke is made up of PM2,5 particulate, or particulate less than 2.5 microns (or 0.0001 inches) in diameter, causing a range of health problems from allergy-like symptoms to aggravating chronic heart and lung conditions.

 

When wildfire pollution enters the HVAC system of a hospital, office building, school, or other public building, it can have the following effects: 

  • Destroying or damaging products and equipment in production facilities.
  • Exposing patients in hospitals to increased risk and complications in a wide range of health conditions.
  • Decreasing productivity in office buildings and schools. (Read about the relationship between indoor air quality and productivity here.) 

 

Camfil’s Hi-Flo ES is one of several air filters produced by Camfil that can protect building inhabitants and guests from the risks of wildfire smoke. Ensure a rating of MERV-13A or higher for the best protection.

 

Food Safety Applications

Clean air is crucial to food and beverage manufacturing processes, not just for protecting the quality of the final product, but also because contaminants in the air can interfere with the function of production equipment. 

 

In one case study, a North American packaged food manufacturer with operations across the world was able to cut filter costs by 26% each year using the Hi-Flo ES with Camfil’s 30/30 panel filter as a pre-filter. 

About Camfil Clean Air Solutions

For more than half a century, Camfil has been helping people breathe cleaner air. As a leading manufacturer of premium clean air solutions, we provide commercial and industrial systems for air filtration and air pollution control that improve worker and equipment productivity, minimize energy use, and benefit human health and the environment. We firmly believe that the best solutions for our customers are the best solutions for our planet, too. That’s why every step of the way – from design to delivery and across the product life cycle – we consider the impact of what we do on people and on the world around us. Through a fresh approach to problem-solving, innovative design, precise process control and a strong customer focus we aim to conserve more, use less and find better ways – so we can all breathe easier.

 

The Camfil Group is headquartered in Stockholm, Sweden, and has 33​ manufacturing sites, six R&D centers, local sales offices in 30 countries, and about 4,80​0 employees and growing. We proudly serve and support customers in a wide variety of industries and in communities across the world. To discover how Camfil USA can help you to protect people, processes and the environment, visit us at www.camfil.us/

 

The post An Up-Close Look at the Most Energy Efficient Bag Filter on the Market appeared first on Air Filters for Clean Air.



from Air Filters for Clean Air